NEW ENGLAND SENSORS AND DATA ACQUISITION

Acuity Research develops advanced laser distance sensors and measurement systems for industrial use. Their capabilities include range measurement from meters to microns.. 

 Capacitec manufactures capacitive based non-contact dimensional systems, displacement sensors, and gap sensors. Application of their technology includes roller gap setting, vibration measurement, thickness and alignment, to name a few. 

Established in 1980, Dytran Instruments, Inc. is a leading manufacturer of piezoelectric accelerometers, force and pressure transducers, and associated electronics. Dytran products are used extensively in industrial test and measurement applications. Additionally, Dytran products are widely utilized for on-board measurements in a variety of aerospace, commercial, and military applications.

Since 1969 Mensor Corporation has been designing and manufacturing precision
pressure measuring and controlling instruments and systems. Typical products
include digital gauges, digital barometers, digital transducers, pressure controllers,
pressure calibrators, pressure standards and custom pressure systems. 
accuracy of 0.010% F.S. and 0.025% F.S. are available on most products.

Neutronics’ Ntron division is a worldwide supplier of high quality industrial Oxygen Analyzers & Ambient Gas Monitors. They offer a complete range of engineered solutions, with capabilities that range from monitoring ultra-trace levels of oxygen in process streams at parts per billion, to monitoring and reporting toxic, flammable, and asphyxiate gases in ambient environments.

Since its beginning in 1964, Ohio Semitronics has been a pioneer in the field of energy measurement.Over the last thirty-five years Ohio Semitronics has developed the widest array of energy measurement devices and instrumentation available from any manufacturer. Whether the application is AC, DC or somewhere in between, Ohio Semitronics has product to fit your needs.

Philtec's non-contact FIBEROPTIC DISPLACEMENT SENSORS offer linear position measurements at distances from 0 to 50 mm away (2 inches), are intrinsically safe and very compact, allowing measurements inside of mechanisms, submerged in fluids, in hostile environments and with targets that are impossible to measure with other sensing technologies.

For over 30 years, Trans-Tek has been a leading manufacturer of Linear and Angular Displacement, and Linear Velocity Transducers.

When Validyne Engineering established itself as a leader in variable reluctance technology more than 30 years ago, the company set a precedent for high sensitivity in the exceedingly low pressure ranges. Since then, Validyne has broken new ground with an extensive line of pressure transducers, modular signal conditioning systems and data acquisition systems that facilitate a wide range of test applications.

Hot Products

Mensor's CPC 3000 High Speed Pressure Controller is ideally suited for production, calibration and test environments where speed is critical. It controls into a 150 cc volume to within 0.025% FS of the setpoint in 3 seconds for pressures above 10 psi.

The Ntron Model SCA is a stand-alone Gas Detector & Controller for use in industrial and laboratory gas monitoring applications. Featuring a wide range of gas detection capabilities, it can operate as a stand-alone unit but comes ready for direct integration with plant PLC or DCS. It can be configured to detect over 150 flammable and toxic gases, as well as CO2 and Oxygen. An integral sensor is included but the SCA can operate through a remote mounted sensor as well.

The Validyne USB2250 PCI Sensor Interface provides data acquisition for your PC via the USB port. 16 sensor inputs in any mix or combination are accepted by the USB2250. No external signal conditioning is required.

Contact us

PAT Associates
118 Point Judith Road
Narragansett, RI 02882

Tel: 401-783-9598
Tel: 800-628-8860
FAX: 401-789-8790